Draytek vigor2920 series User Manual page 236

Item
Enable
Disable
Default session limit
Limitation List
Start IP
End IP
Maximum Sessions
Add
Edit
Delete
Administration Message
Default Message
Index (1-15) in Schedule
Setup
After finishing all the settings here, please click OK to save the configuration.
Vigor2920 Series User's Guide
Description
Click this button to activate the function of limit session.
Click this button to close the function of limit session.
Defines the default session number used for each computer in
LAN.
Displays a list of specific limitations that you set on this web
page.
Defines the start IP address for limit session.
Defines the end IP address for limit session.
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session
limit for the specific limitation you set for each index.
Adds the specific session limitation onto the list above.
Allows you to edit the settings for the selected limitation.
Remove the selected settings existing on the limitation list.
Type the words which will be displayed when reaches the
maximum number of Internet sessions permitted.
Click this button to apply the default message offered by the
router.
You can type in four sets of time schedule for your request. All
the schedules can be set previously in Application >>
Schedule web page and you can use the number that you have
set in that web page.
226