Draytek vigor2920 series User Manual page 134

Item
Add Tag
Priority
After finishing all the settings here, please click OK to save the configuration.
W A N l i
W A N l i
They are provided for router-borne application such as TR-069. The settings must be applied
and obtained from your ISP. For your special request, please contact with your ISP and then
click WAN link of Channel 5, 6 or 7 to configure your router.
Available settings are explained as follows:
Item
WAN for Router-borne
Application
Vigor2920 Series User's Guide
Description
down list on the web page of Internet Access. Though you can
enable eight channels in this page, yet only one channel can be
chosen on the web page of Internet Access.
To identify the usage of VLAN, check this box to invoke this
setting. And type the number for VLAN ID (number).
To add the packet priority number for such VLAN. The range
is from 0 to 7.
n k f o r C h a n n e l 5 , 6
n k f o r C h a n n e l 5 , 6
Description
Choose the router service for channel 5, 6 or 7.
Management - It can be specified for general management
(Web configuration/telnet/TR069). If you choose Management,
the configuration for this VLAN will be effective for Web
configuration/telnet/TR-069.
VoIP - It can be specified for VoIP only. If you choose VoIP,
the configuration for this VLAN will be effective for VoIP
data transmitting and receiving.
IPTV - Packets from IGMP proxy will be sent out from such
WAN interface. Therefore, the setting for IGMP shall be
a n d 7
a n d 7
124