Draytek vigor2920 series User Manual page 126

D e t a i l s
D e t a i l s
To use 4G Wimax /LTE for accessing the internet, please choose Internet Access from
WAN menu. Then, select 4G USB Modem (DHCP Client) mode for WAN3. The following
web page will be shown.
Available settings are explained as follows:
Item
4G USB Modem (DHCP
mode)
SIM PIN code
Network Mode
APN Name
MTU
LTE software version
LTE hardware version
After finishing all the settings here, please click OK to activate them.
Vigor2920 Series User's Guide
P a g e f o r 4 G U S B M
P a g e f o r 4 G U S B M
Description
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
Type PIN code of the SIM card that will be used to access
Internet.
Force Vigor router to connect Internet with the mode specified
here. If you choose 4G/3G/2G as network mode, the router will
choose a suitable one according to the actual wireless signal
automatically.
APN means Access Point Name which is provided and
required by some ISPs.
It means Max Transmit Unit for packet. The default setting is
1380.
Display the software version of LTE.
Display the firmware version of LTE.
o d e m ( D H C P C l i e n
o d e m ( D H C P C l i e n
116
t ) i n W A N 3
t ) i n W A N 3