Draytek vigor2920 series User Manual page 139

Force router to use "DNS
server IP address"
settings as specified in ...
Inter-LAN Routing
After finishing all the settings here, please click OK to save the configuration.
To configure LAN 1 ~ LAN 4, or IP Routed Subnet, simply click Details Page to open the
settings page.
D e t a i l s P a g e f o r L
D e t a i l s P a g e f o r L
LAN1 is the default configuration for basic host connection.
Available settings are explained as follows:
Item
Network Configuration
DHCP Server
Configuration
Force Vigor router to use DNS servers configured in
LAN1/LAN2/LAN3/LAN4 instead of DNS servers given
by the Internet Access server (PPPoE, PPTP, L2TP or
DHCP server).
Check the box to link two or more different subnets (LAN
and LAN).
A N 1
A N 1
Description
IP Address - Type in IP address for connecting to a local
private network (Default: 192.168.1.1).
Subnet Mask - Type in an address code that determines the
size of the network. (Default: 255.255.255.0/ 24)
RIP Protocol Control - Disable deactivates the RIP protocol.
It will lead to a stoppage of the exchange of routing
information between routers. (Default) Enable can activate the
RIP protocol.
DHCP stands for Dynamic Host Configuration Protocol. The
router by factory default acts a DHCP server for your network
so it automatically dispatch related IP settings to any local user
configured as a DHCP client. It is highly recommended that
you leave the router enabled as a DHCP server if you do not
have a DHCP server for your network.
Enable Server - Let the router assign IP address to every host
129
Vigor2920 Series User's Guide