For Vigor2920V - Draytek vigor2920 series User Manual

1 . 2 . 4 F o r V i g o r 2 9
1 . 2 . 4 F o r V i g o r 2 9
LED
ACT (Activity)
USB
CSM
WCF
WAN1/2
DoS
Phone 1/2
LED on Connector
WAN 1/
WAN2 (Giga)
GigaLAN
1/2/3/4
2 0 V
2 0 V
Status
Blinking
Off
On
Blinking
On
On
On
Blinking
On
Blinking
On
Off
Blinking
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Explanation
The router is powered on and running normally.
The router is powered off.
USB device is connected and ready for use.
The data is transmitting.
The profile(s) of CSM (Content Security
Management) for IM/P2P, URL/Web Content Filter
application can be enabled from Firewall
>>General Setup. (Such profile must be established
under CSM menu).
The Web Content Filter is active. (It is enabled from
Firewall >> General Setup).
The WAN1 or WAN2 connection is ready.
It will blink while transmitting data.
The DoS/DDoS function is active.
It will blink while deleting an attack.
The phone connected to this port is off-hook.
The phone connected to this port is on-hook.
A phone call comes.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps when left
LED is on.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps when left
LED is on.
9
Vigor2920 Series User's Guide