Note: If Transparency Mode is selected in Firewall>>General Setup, User
Management cannot be used any more. Please uncheck Transparency Mode first if you
want to utilize user management to handle users in LAN, WAN or WLAN.
4
.
5
.
1
G
e
n
e
r
a
l
S
e
t
4
.
5
.
1
G
e
n
e
r
a
l
S
e
t
General Setup can determine the standard (rule-based or user-based) for the users controlled
by User Management. The mode (standard) selected here will influence the contents of the
filter rule(s) applied to every user.
Available settings are explained as follows:
Item
Mode
Web Authentication
u
p
u
p
Description
There are two modes offered here for you to choose. Each
mode will bring different filtering effect to the users involved.
User-Based - If you choose such mode, the router will apply
the filter rules configured in User Management>>User
Profile to the users.
Rule-Based –If you choose such mode, the router will apply
the filter rules configured in Firewall>>General Setup and
Filter Rule to the users.
Choose HTTP or HTTPS as the protocol used by users to log
into the web page.
177
Vigor2920 Series User's Guide