Table of Contents
Advertisement
8
Graphics tab
Item
Resolution
Halftone
Other
Magnification
Device Options tab
To specify the following printer-specific options, right-click the printer icon in
the Printers window, and then click "Properties" in the menu that appeared.
Item
Collate
Offset
Binding Position
Duplex
Special Mode
Staple
Hole-Punch
Center Staple and Fold
Front Cover
Back Cover
Paper Tray (Cover Page)
OHP Interleaving
OHP Interleaving Tray
Stop
You can specify the following options by right-clicking the printer icon in the
Printers window, then clicking "Properties".
Item
Usable Printer Memory
Usable Option
8-4
Setting up the PPD driver (Windows)
Function
Specifies the print resolution.
Specifies the halftone number of lines and the pattern angle.
Prints a negative or mirror image.
Specifies the enlargement and reduction ratio.
Function
Specifies whether to print multiple copies in sets.
When printing multiple copies, shifts the output position of each
set.
Specifies the binding position.
Specifies duplex printing.
Specifies booklet printing.
Performs stapling.
Performs hole punching.
Folds the printouts in half and staples.
Attaches a front cover page.
Attaches a back cover page.
Selects the input tray for the front cover page and back cover
page.
Inserts interleaves between overhead projector transparencies.
Selects the input tray for the transparency interleaves.
Stops printing temporarily after part of the document has been
printed so that the proof print can be checked.
Function
Specifies the memory installed on this machine.
Specifies the options installed on this machine.
200/250/350
Advertisement
Table of Contents
