Setting The File Margin - Konica Minolta bizhub250 Operation Manual

Hide thumbs Also See for bizhub250:

Table of Contents

Setting up the PCL driver

Setting the file margin

File margins are added to the document before it is printed.

Click the Setup tab.

Select the "File Margin" check box.

To set the width of the file margin, click the [Details] button, and then

specify the desired settings in File Margin Details dialog box that ap-

Front Side/Back Side: Sets the file margin values. By clearing the

"Same Value for Front and Back Sides" check box, you can specify

each value for the front and back sides.

Shift Mode: Selects the printing process for the document.