Table of Contents
Advertisement
9. Screw the housing cover to the top housing slowly by twisting it clockwise.
Note: When you turn on the power, the camera will enter self-inspection mode and run a
self-testing program. Once this is complete, you will be able to operate it via any IP network.
3.5.5 Ceiling Mount Installation
It is required to use the optional Indoor Recessed Mount Bracket and Surface Ring to attach the
camera to the ceiling for supporting the camera's weight. Make sure the ceiling is strong enough to
easily support the weight of the bracket and the camera.
1. Replace the desiccant bags inside the top housing. See 3.5.2.1 Replacing the Desiccant Bags.
2. Cut a hole on the ceiling using the supplied template.
15
EPTZ3602/3602i
Advertisement
Table of Contents
