Table of Contents
Advertisement
3.3
Cable Descriptions
Power Cable
An adapter with 24 VAC / 3.5A output provides the power to the EPTZ3602/EPTZ3602i. An extension
power line may be needed.
Note: Different regions may use different ranges for AC voltage. Be sure to check the voltage range in
your area before installing.
Video Cable
A BNC cable is used for connecting an EPTZ3602/EPTZ3602i to a DVR or a monitor. An amplifier may
be needed depending on the distance.
RS-485 Cable
The yellow wire carries RS-485+, and the orange wire carries RS-485-. Connect these wires to the
EKB500 or other control device in order to control the PTZ camera.
Yellow RS485+
Orange RS485-
VIDEO
24VAC
4
EPTZ3602/3602i
Advertisement
Table of Contents
