Ceiling / Desk Mount - EverFocus eZ Tracker EFN3320 User Manual

3.2 Ceiling / Desk Mount

Ceiling Mount
1. Stick the Mounting Template to the ceiling / desk. Drill the three red cross marks on the inner
circle, and the square below only if you wish to run the cables through the ceiling / desk. Note that
the square below also indicates the cable position. Point the square below to the direction for
running the cables.
For the Tilting Wall Mount Bracket
2. Insert the supplied three Anchors into the three holes and then screw the Base Plate to the ceiling
/ desk using the supplied three Screws.
Drill a hole only if you want to run
the cables through the ceiling / desk.
Base Plate
6
EFN3320 Fisheye Camera
Desk Mount