Note 1: In order to protect the bubble from dirt and scrape, please put on the gloves
before installing the bubble.
Note 2: The camera module on the mechanical part is very sensitive. Please be careful
when installing this part.
13. Turn on the power, and start to operate the EPTZ3600.
Note: When turning on the power, EPTZ3600 will enter self-inspection mode, and carry out
a self-testing program. After finishing self-inspection, you can start to operate the
EPTZ3600.
2.4.4. EPTZ3600 Dome Camera Ceiling Mount Installation
The indoor recessed mount bracket and surface ring are used for ceiling mount installation.
Installation steps are described below:
1. Use the ceiling template provided to cut the ceiling.
(Indoor Recessed Mount Bracket & Surface Ring)
Cut the ceiling
32