Check Harness/Headrest Height; Accessories (On Select Models) - DJG Alpha Omega Instruction Manual

Hide thumbs Also See for Alpha Omega:
Table of Contents

Advertisement

Check Harness/Headrest Height

Rear-Facing Position:
6
Harness guide must be
Harness
even with or just below
Guide
the shoulders.
If the harness guide is
above the child's shoulders
with the headrest in the
lowest position,
use this child restraint. Use
an infant child restraint
instead.
Forward-Facing Position: Harness guide must be
with or just above
the shoulders.
If the harness guide is below the child's shoulders
with the headrest in the 4th highest position, the child
weighs at least 40 lbs. (18.1 kg) and is over 1 year old,
convert the seat to a belt-positioning booster.
Rotate headrest/harness
7
adjusting levers in. Move
headrest up or down to
adjust. Make sure headrest
is locked into place.
NOTE:
is for belt-positioning use
only.
WARNING
!
Make sure
bar is locked
position. Failure to
do this can result
in serious injury or
death.
12
4358-5843A US All in One.indd 15-16
4358-5843A US All in One.indd 15-16
Accessories
do not
even
The highest position
metal
into
(on select models)
Infant Pillow (on select
models):
The pillow provides extra
comfort for your child.
To remove the pillow,
from the back of the
pillow, undo both
fastening strips that attach
the pillow to the harness
straps.
To replace the pillow,
thread the fastening strips
behind each harness strap.
Attach the fastening strips
to the pillow.
Cup Holder (on select
models):
Pull pad off corner. Hook
bottom of cup holder to
edge of shell. Rotate cup
holder up until tab on cup
holder snaps into hole on
shell. Replace pad.
13
1/26/12 11:06 AM
1/26/12 11:06 AM

Advertisement

Table of Contents
loading

Table of Contents