Latch - DJG Alpha Omega Instruction Manual

Rear-Facing Installation with
LATCH: Install LATCH Belt
1
2
3
28
4358-5843A US All in One.indd 31-32 4358-5843A US All in One.indd 31-32
Do not use the LATCH
system along with the
adult lap or lap/shoulder
belt.
To thread LATCH belts:
Pull the seat pad off the
front corners of shell.
LATCH adjuster can be
on either side, but belt
should not be twisted.
Route entire LATCH
belt through the upper
slot in side of shell.
Reach under pad, pull
one LATCH hook
between rear harness
slot and buckle strap.
Push LATCH hook
4
through the rear-facing
belt path slot.
Pull other end of LATCH
5
hook between buckle
strap and rear harness
slot.
Push LATCH hook
6
through the other rear-
facing belt path slot.
Put seat pad back over
7
corners of shell.
Completed threading of
the LATCH system rear-
facing is shown.
29
1/26/12 11:06 AM 1/26/12 11:06 AM