Preparing Child Restraint; Headrest Adjustment - DJG enRoute Instruction Manual

4358-4294 enRoute 5/18/07 7:44 AM

Preparing Child Restraint

1
2
3
10
Page 13
Hold the rectangular
shaped flap on the rear of
the seat base down to
expose the backrest
connection hole.
Insert the hook on the
backrest into the large
opening on back of seat
base. Make sure backrest
is laying flat (horizontal)
when connecting. Make
sure seat pad does not get
caught between the
moving parts.
Rotate backrest up until it
clicks twice. Tuck backrest
hole flap under the
backrest pad.

Headrest Adjustment

This child restraint has 8
1
headrest positions. The
backrest/headrest are
removable.
To Raise or Lower
2
Headrest:
Grasp top of headrest
with one hand and hold
the headrest adjuster lock
with the other hand.
Pull headrest up and pull
the headrest adjuster lock
out.
Raise and lower headrest
into selected position.
Headrest Adjuster
Release the headrest
Lock
adjuster lock into one of
the 8 headrest heights.
Make sure headrest is
locked by sliding headrest
up and down. Headrest
will move slightly when it
is locked.
11