Stiga SEV 2416Q Operator's Manual page 29

USING THE MACHINE
4) Always wear suitable clothing when using
the machine. Your dealer can provide you
with all the information on the most suit-
able accident-prevention devices to guar-
antee your safety. Wear anti-vibration
gloves. All the above-mentioned precau-
tions do not however guarantee the pre-
vention of certain risks – i.e. Raynaud's
phenomenon or Carpal tunnel syndrome.
For operators who use this machine for
prolonged periods, it is therefore recom-
mended to have periodic check-ups on
the hands and fingers.
If any of the above mentioned symptoms
should appear, please contact a physi-
cian immediately.
5) This machine's electrical system gener-
ates an average sized electromagnetic
field, but it is not however possible to ex-
clude the possibility of interference on
any active or passive medical devices that
operators may be wearing; this could be
risky for their health conditions. All those
using medical devices should always con-
sult their GP, or the device manufacturer,
before using this machine.
6) Mow only in daylight or good artificial
light.
7) Take utmost care when working near me-
tal fences
8) Keep the chain away from the electric ca-
ble. Use the cable clamp to prevent the ex-
tension lead from disconnecting acciden-
tally. Make sure it is connected to the
socket without being forced. Never touch
a live electric cable if it is poorly insu-
lated. If the extension lead gets damaged
during use, do not touch the cable and un-
plug the extension lead immediately.
9) Take care not to hit the bar hard against
foreign objects or flying debris caused by
the movement of the chain.
10) Stop the engine and unplug the machine
from the mains:
– whenever you leave the machine unat-
tended;
– before cleaning, checking or servicing
the machine;
– after striking a foreign object. Inspect
the machine for any damage and make
repairs before restarting it again;
– if the machine begins to abnormally vi-
brate (Immediate look for the cause of
the vibrations and take for necessary
controls at a Specialised Centre).
– when the machine is not in use.
IMPORTANT
correctly used electric chain-saw may disturb oth-
ers and have a serious impact on the environment.
To respect people and the environment:
– Avoid using the machine in environments or at
times of the day when it may disturb others.
– Scrupulously comply with local regulations and
provisions for the disposal of waste materials
after sawing.
– Scrupulously comply with local regulations and
provisions for the disposal of oils, damaged parts
or any elements which have a strong impact on
the environment.
– A certain amount of chain lubricating oil is rele-
ased into the environment when the machine is
running, so only use biodegradable oils made
specifically for this use.
– To avoid the risk of fire, do not leave the machi-
ne with the engine hot on leaves or dry grass.
WARNING!
to use the machine for felling and delimbing.
1. CHECKS DURING WORK
• Checking the chain tension
The chain tends to stretch gradually as you work,
so you need to check its tension frequently.
IMPORTANT
(or after replacing the chain), it must be checked
more frequently due to settling of the chain.
WARNING!
loose, as it can be hazardous if the chain slips
out of its guides.
To adjust the chain tension, follow the instructions
in Chapter 5.2.
• Cut-off during work
Your machine is designed with an overload pro-
tection with circuit breaker. If the chain saw is
clogged (e.g. blocking of the cutting means, chain
EN
Always remember that an in-
It takes specific training
During the first period of use
Never work with the chain
9