Identification Of The Main Components - Stiga SEV 2416Q Operator's Manual

2
EN
1. IDENTIFICATION OF MAIN COMPONENTS
MAIN COMPONENTS
1. Power unit
2. Spiked bumper
3. Front hand guard
4. Front handgrip
5. Rear handgrip
6. Chain catcher
7. Bar
8. Chain
9. Bar cover
10. Identification plate
11. Power cable
12. Extension lead
(not supplied)
CONTROLS AND FILLING POINTS
13. Trigger switch
14. Safety button
15. Reset button
16. Extension lead connection
21. Chain oil tank cap
22. Chain oil gauge
IDENTIFICATION PLATE
10.1) Conformity marking in accordance
with Directive 2006/42/EC
10.2) Name and address of the manufacturer
10.3) Acoustic output level LWA in
accordance with directive 2000/14/EC
10.4) Manufacturer's model of reference
10.5) Machine model
10.6) Serial number
10.7) Year of manufacture
10.8) Power supply frequency and voltage
10.9) Engine power
10.10) Dual insulation
10.11) Article Code
10.12) Manufacturing country
10.13) Maximum permitted length of the bar.
Do not use longer bars.
Do not dispose of electrical equipment together with household waste material. In observance of European Directive
2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric
equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible
recycling facility. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwa-
ter and get into the foodchain, damaging your health and well-being. For further information on the disposal of this product, con-
tact your dealer or a domestic waste collection Service.
IDENTIFICATION OF MAIN COMPONENTS
4
1
5
10
11
10.1
3
2
6
12
21 22
13
10.12 10.5 10.2
10.7 10.10 10.8 10.6
8
9
7
15 14
16
10.4 10.3
10.11 10.9 10.13