Chapter 5: Configuration
Camera Settings
Here you can control the image color and related settings as well as IR light of your IP camera.
Figure 5-3. Camera setting page
Video Properties
Here you can adjust the Brightness, Sharpness and Saturation on your IP camera.
White Balance
This controls the white balance of IP camera; available selection: Auto (default), Sunny, Cloudy, Fluorescent
Lamp, and Incandescent Lamp.
Flickerless
Here controls the flickerless mode: 60 (default) or 50 Hz.
Exposure Control
This allows you to control the exposure time of the camera. Default: Auto mode. You can manually set the
shutter speed within the range of 1/5s to 1/16000s to meet your lighting conditions.
Low Light Behavior
Here it allows the camera to get better and clearer picture when under low light condition. (Default: enabled)
LED Indicator
This let you control the LED indicator at the front of camera. Turn on the LED indicator or turn it off in case
you don't want people to notice the camera is working.
5-3
Camera Settings