Install Camera Software - COMPRO NC3230 Installation Manual

Switch

Install Camera Software

Prior to installing camera software, make sure you have powered on the Compro IP
Camera installed in your home/office network.
To begin software installation, insert the installation CD included in the package into the
CD-ROM drive of your viewing PC. Make sure your Compro IP camera connects to the
same home/office network that your viewing PC connects to. Then the Compro iWizard
setup utility will start automatically to guide you through the installation process. If the
iWizard doesn't start on its own, browse the contents of the installation CD and double-
click on the "iWizard.exe" file to run the setup wizard. (Note if you are running Windows
7/ Vista, you need to run iWizard tool with system administrator rights. Simply right click
on the iWizard icon on your desktop, and select "Run as administrator")
After the Compro iWizard is launched, select the displayed language first. Then click
[IP Camera Setup] and select the camera model you wish to install, and follow the on-
10 Installation