COMPRO IP55 User Manual page 20

Compro IP55/60/70 Network Camera
4. Please check the camera name, date
and time setting.
5. When you come to Seedonk setup, you
can choose whether to use Seedonk
P2P service and remotely access your
camera through Seednok platform.
If you choose [Yes], you may opt for
connecting to a different Seedonk
ser ver by pressing the [Advanced
S e t t i n g s ] b u t to n , a n d e nte r i n g a
different server address. (If you enable
Seedonk P2P service, you won't be able
to use iDDNS service.)
6. S e l e c t t h e co n f i g u r a t i o n o f yo u r
I P a d d r e s s t o o b t a i n I P a d d r e s s
automatically (DHCP mode) or manually
enter IP address information. Then
choose whether to allow iWizard to
automatically configure your firewall,
configure connection port and the
frequency of your local power. (Note
if you enabled Seedonk P2P service,
you won't see connection port and
frequency configuration here.)
2-8
Running the iWizard installer
Figure 2-12. Camera configuration
Notice!
Seedonk video streams are encrypted end-to-end and most of the
streams are sent through direct channels and don't pass through
Seedonk server, which helps protect user privacy.
Figure 2-14. Device configuration
Figure 2-13. Seedonk setup