Table of Contents
Advertisement
7. (If you are not using wireless connection,
please skip to point 9) If you have
purchased and connected the Compro
wireless adaptor to your IP camera, you
will come to wireless network setup.
Please click[Yes] to connect wirelessly
by default. The wizard will search for
available access points. Then select one
access point.
8. The wizard will select an appropriate
encryption method automatically. You
need to input the correct passphrase,
and then select a suitable IP address
configuration in order to continue with
setup. (For Wireless connection only.)
9. (Skip this part if you enabled Seedonk
P2P ser vice) I f you didn't enable
Seedonk P2P service earlier, you can set
up iDDNS service here. To do so, click
[Yes] and input your desired address
name. Then click [Check Availability]
button to check if the entered address
name has been used. When successful,
you can click [Create Shortcut] button
to create a shortcut on your desktop for
convenient access.
Figure 2-15. Wireless connection setup
Figure 2-16. Wireless connection setup
Figure 2-17. iDDNS configuration
Running the iWizard installer
Chapter 2: Installtion
2-9
Advertisement
Table of Contents
