Removing the Control-
Buttons Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Follow the procedure from step 1 to step 5 in "Removing the
Assembly".
2
Remove the
Procedure
1
Using a plastic scribe, pry the Mylar sheet to release the control-buttons
board from the slot on the display bezel.
2
Disconnect the control-buttons board cable from the control-buttons
board.
back
cover.
Computer. After working inside your
After Working Inside Your
Stand
35