Removing the control-buttons
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
stand
2
Remove the
back
3
Remove the
VESA-mount
Procedure
1
Lift the latch and disconnect the control-buttons board cable from the system
board.
2
Note the control-buttons board cable routing and peel it off from its routing
guides on the display-assembly base.
3
Using your fingertips, press the securing clips on the control-buttons board slot.
4
Lift the control-buttons board off the display bezel.
computer. After working inside your computer, follow
After working inside your
assembly.
cover.
bracket.
computer. For more safety best
www.dell.com/
Before
65