Wireless Statistics; Throughput Monitor - TP-Link TL-WA701ND User Manual

TL-WA701ND/TL-WA801ND/TL-WA901ND
Enable AP Isolation - Isolates all connected wireless stations so that wireless stations

cannot access each other through WLAN. This function will be disabled if WDS/Bridge is
enabled.

4.6.5 Wireless Statistics

Selecting Wireless > Wireless Statistics will allow you to see the wireless transmission
information in the following screen shown in Figure 4-27.
Figure 4-27 Statistics of the device attached wireless stations
MAC Address - Shows the connected wireless station's MAC address

Current Status - The connected wireless station's running status, one of STA-AUTH /

STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected
Received Packets - packets received by the station

Sent Packets - packets sent by the station

You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.

Note:
This page will be refreshed automatically every 5 seconds.

4.6.6 Throughput Monitor

Selecting Wireless > Throughput Monitor will helps to watch wireless throughput information in
the following screen shown in Figure 4-28.
Wireless N Access Point User Guide
51