TP-Link TL-WA701ND User Manual page 30

TL-WA701ND/TL-WA801ND/TL-WA901ND
Step 4: Wait for a while until the next screen appears. Click OK to complete the WPS
configuration.
II. By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One: Enter the PIN into my AP
Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-5,
then the following screen will appear.
The WPS Configuration Screen of Wireless Adapter
The WPS Configuration Screen of Wireless Adapter
Wireless N Access Point User Guide
22