Main Features; Appearance; The Front Panel - TP-Link TL-WA701ND User Manual

TL-WA701ND/TL-WA801ND/TL-WA901ND

1.3 Main Features

 Supports Access Point, Multi-SSID, Client, Repeater （ Universal Repeater） and Bridge with AP
modes
 Up to 4 SSIDs and VLAN support
 Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector
 Easily setup a WPA encrypted secure connection at a push of the WPS button
 Supports Remote and Web management
 Backward compatible with 802.11b/g products

1.4 Appearance

1.4.1 The Front Panel

The front panel of the AP consists of several LED indicators, which is designed to indicate
connections. View from left to right, Table 1-1 , 1-2describes the LEDs.
Name Status
On
Off
Flashing
On
Off
On
Off
On
Off
Flashing
Note: For TL-WA701ND, there is another System LED:
Name Status
Off
On
Flashing
Figure 1-1
The device is on.
The device is off.
The device is initializing or upgrading.
A device is connected to the Ethernet port.
No device is connected to the Ethernet port.
The Wireless is working properly.
The Wireless is disabled.
A wireless device has been successfully added to the network by
WPS function.
The WPS function is disabled or a wireless device failed to be added
to the network in 2 minutes after WPS function is enabled.
A wireless device is connecting to the network by WPS function. This
process will last in first 2 minutes.
Table 1-1
The device has a system error.
The device is initialising.
The device is working properly.
Table 1-2
3
Wireless N Access Point User Guide
Indication
Indication