TP-Link TL-WA701ND User Manual page 27

TL-WA701ND/TL-WA801ND/TL-WA901ND
device can be found in the label or User Guide.
Restore PIN - Restore the PIN of the device to its default.

Gen New PIN - Click this button, and then you can get a new random value for the device's

PIN. You can ensure the network security by generating a new PIN.
Disable PIN of this device - WPS external register of entering the device's PIN can be

disabled or enabled manually. If the device receives multiple failed attempts to authenticate
an external Register, this function will be disabled automatically.
Add Device - You can add a new device to the existing network manually by clicking this

button.
To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and device using either Push Button Configuration (PBC)
method or PIN method.

Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company for
example.
I. By PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods.
Method One:
Step 1: Press the WPS/RESET button on the rear panel of the device.
Step 2: Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step 3: Wait for a while until the next screen appears. Click OK to complete the WPS
configuration.
Wireless N Access Point User Guide
19