TP-Link TL-WA701ND User Manual page 31

TL-WA701ND/TL-WA801ND/TL-WA901ND
Step 2: Choose "Enter the new device's PIN" and enter the PIN code （take 16952898 for
example） of the wireless adapter in the field after PIN as shown in the figure above. Then
click Connect.

Note:
The PIN code of the adapter is always displayed on the WPS configuration screen as shown in the
following figure.
Step 3: For the configuration of the wireless adapter, please choose "Enter the PIN of this
device into my access point or wireless router." in the configuration utility of the WPS
as below, and click Next.

Note:
In this example, the default PIN code of this adapter is 16952898 as the above figure shown.
Method Two: Enter the PIN from my AP
Step 1: Get the Current PIN code of the AP in Figure 4-5 (each AP has its unique PIN code. Here
takes the PIN code 12345670 of this AP for example).
Step 2: For the configuration of the wireless adapter, please choose "Enter the PIN of my
access point or wireless router." in the configuration utility of the WPS as below, and
Figure 4-7 Enter the PIN
The WPS Configuration Screen of Wireless Adapter
Wireless N Access Point User Guide
23