TL-WR802N
300Mbps Wireless N Nano Router
You will see the following screen when the new device has successfully connected to the network.
Figure 4-6
Note:
1. The WPS LED on the AP will light green for five minutes if the device has been successfully
added to the network.
2. The WPS function cannot be configured if the Wireless function of the AP is disabled. Please
make sure the Wireless function is enabled before configuring the WPS.
4.5 Operation Mode
The Router supports five operation mode types: Wireless Router, Hotspot Router, Access
Point, Range Extender and Client. Please select one you want. Click Save to save your choice,
which is shown as Figure 4-7.
Figure 4-7 Wireless Working Mode Settings
- 36 -