TP-Link TL-WR802N User Manual page 32

2. Then, the Wireless page will appear as shown in
is recommended that you rename an SSID, choose a Security Type and enter a Password.
Then click Next.
Wireless Radio - Enable or disable the wireless radio choosing from the pull-down list.

Wireless Network Name - Enter a string of up to 32 characters. The same name of

SSID (Service Set Identification) must be assigned to all wireless devices in your
network. The default SSID is set to be TP-LINK_XXXX (XXXX indicates the last unique
four numbers of each Router's MAC address). But it is recommended strongly that you
TL-WR802N
Figure 3-11 Quick Setup - PPTP
Figure 3-12 Quick Setup - Wireless
- 16 -
300Mbps Wireless N Nano Router
. Set the wireless parameters. It
Figure 3-12