TP-Link TL-WR802N User Manual page 39

Type - Choosing SmartDHCP to get IP address from remoter DHCP server, or

choosing static IP to config IP address manually.
IP Address - Enter the IP address of your system in dotted-decimal notation (factory

default: 192.168.0.254).
Subnet Mask - An address code that determines the size of the network. Normally

255.255.255.0 is used as the subnet mask.
Click the Next button in Figure 3-19. You will then see the Review setting page.
3.
TL-WR802N
Figure 3-19 Quick Setup – Network Settings
Figure 3-20 Quick Setup – Review setting
- 23 -
300Mbps Wireless N Nano Router