WPA-PSK/WPA2-Personal - It's the WPA/WPA2 authentication type based on pre-shared
passphrase.
Version - you can choose the version of the WPA-PSK security on the drop-down list. The
•
default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
•
either Automatic, or TKIP or AES as Encryption.
Note:
If you check the
find a notice in red as shown in Figure 4-21.
WPA /WPA2-Enterprise - It's based on Radius Server.
Version - you can choose the version of the WPA security from the pull-down list. The
•
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
Encryption - You can select Automatic, TKIP or AES.
•
Radius Server IP - Enter the IP address of the Radius server.
•
Radius Port - Enter the port that Radius server used.
•
Radius Password - Enter the password for the Radius server.
•
Group Key Update Period - Specify the group key update interval in seconds. The value
•
should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard.
Type - you can choose the type for the WEP security on the pull-down list. The default
•
setting is Automatic, which can select Shared Key or Open System authentication type
automatically based on the wireless station's capability and request.
TL-WR802N
WPA-PSK/WPA2-PSK
300Mbps Wireless N Nano Router
radio button and choose TKIP encryption, you will
Figure 8-20
- 210 -