TP-Link TL-WR802N User Manual page 155

Wireless Name of Root AP - The SSID of AP that you want to access.

MAC Address of Root AP - The MAC address of AP that you want to access.

Survey - Click this button, you can search the AP which runs in the environment.

Region - Select your region from the pull-down list. This field specifies the region where the

wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
Wireless Security Mode - This option should be chosen according to the security

configuration of the AP you want to access. It is recommended that the security type is the
same as your AP's security type.
Wireless Password - If the AP your router is going to connect need password, you need to

fill the password in this blank.
Click Survey button on the Wireless page as shown in Figure 6-11, and then AP List page will
appear as shown in Figure 6-12. Find the SSID of the Access Point you want to access, and click
Connect in the corresponding row. For example, the second item is selected. The target network's
SSID will be automatically filled into the corresponding box which is shown as the Figure 6-11.
TL-WR802N
Figure 6-11 Wireless Settings - Range Extender
- 139 -
300Mbps Wireless N Nano Router