Operation Mode - TP-Link TL-WR850N User Manual

Chapter 4
• Channel Width
• MAC Address
• Internet - This field displays the current settings of the Internet, and you can configure
them on the Network
• MAC Address
• IP Address
or 0.0.0.0 if the IP Address is assigned dynamically and there is no internet
connection.
• Subnet Mask
• Default Gateway
Dynamic IP as the internet connection type, click
obtain new IP parameters dynamically from the ISP or release them.
• DNS Server
4 2

Operation Mode

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Operation Mode.
3. Select the working mode as needed and click Save.
- The current wireless channel width in use.
- The physical address of the router.
> Internet page.
- The physical address of the WAN port.
- The current WAN (Internet) IP Address. This field will be blank
- The subnet mask associated with the WAN IP Address.
- The Gateway currently used is shown here. When you use
- The IP addresses of DNS (Domain Name System) server.
Configure the Router in Wireless Router Mode
Renew or Release here to
15