IP address - The LAN IP address of the Router.
•
Subnet Mask - The subnet mask associated with LAN IP address.
•
Wireless - This field displays basic information or status for wireless function, you can
configure them in the Wireless > Wireless Settings page.
Operation Mode - The current wireless working mode in use.
•
Wireless Network Name - The SSID of the AP.
•
Channel - The current wireless channel in use.
•
Mode - The current wireless mode which the Router works on.
•
Channel Width - The current wireless channel width in use.
•
MAC Address - The physical address of the Router, as seen from the WLAN.
•
Traffic Statistics - The Router's traffic statistics.
Received (Bytes) - Traffic that counted in bytes has been received out from the WAN port.
•
Received (Packets) - Traffic that counted in packets has been received out from the WAN
•
port.
Sent (Bytes) - Traffic that counted in bytes has been sent out from the WAN port.
•
Sent (Packets) - Traffic that counted in packets has been sent out from the WAN port.
•
System Up Time - The length of the time since the Router was last powered on or reset.
Click the Refresh button to get the latest status and settings of the Router.
5.3 Operation Mode
The Router supports five operation mode types: Wireless Router, Access Point, Range
Extender, Client and Hotspot. Please select one you need. Click Save to save your choice,
which is shown as below.
TL-WR902AC
AC750 Wireless Travel Router
- 103 -