TL-WR802N
300Mbps Wireless N Nano Router
Note:
1. The WPS LED on the AP will light green for five minutes if the device has been successfully
added to the network.
2. The WPS function cannot be configured if the Wireless function of the AP is disabled. Please
make sure the Wireless function is enabled before configuring the WPS.
5.5 Operation Mode
The Router supports five operation mode types: Wireless Router, Access Point, Range
Extender, Client and Hotsopt Router. Please select one you want. Click Save to save your
choice, which is shown as Figure 5-7.
Figure 5-7 Wireless Working Mode Settings
5.6 Network
Figure 5-8 the Network menu
There is only one submenu under the Network menu (shown in Figure 5-8): LAN.
5.6.1 LAN
Choose menu "Network → LAN", and then you can configure the IP parameters of the LAN on
the screen as below.
- 107 -