TP-Link TL-WR802N User Manual page 36

SSID - The SSID of the AP your router is going to connect to as a client.

BSSID - The BSSID of the AP your router is going to connect to as a client.

Key type – The Key type is the same as your AP's security type.

WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).

It indicates the index of the WEP key.
Auth type - It indicates the authorization type of the Root AP.

Password - If the AP your router is going to connect needs password, you need to fill the

password in this blank.
Local SSID - Enter a value of up to 32 characters. The same Name (SSID) must be

assigned to all wireless devices in your network.
Wireless Security Mode - You can configure the security settings of your wireless

network.
Wireless Password - Input the password of your Local SSID.

4. The Review Setting page is shown as Figure 3-17. Click the Reboot button to make your
wireless configuration take effect and finish the Quick Setup.
TL-WR802N
Figure 3-16 Quick Setup - Static IP
- 20 -
300Mbps Wireless N Nano Router