Dhcp Client List; Address Reservation - TP-Link TL-WR710N User Manual

Address Lease Time - The Address Lease Time is the amount of time a network user will

be allowed connection to the Router with their current dynamic IP Address. Enter the
amount of time in minutes and the user will be "leased" this dynamic IP Address. After the
time is up, the user will be automatically assigned a new dynamic IP address. The range of
the time is 1 ~ 2880 minutes. The default value is 120 minutes.
Default Gateway (Optional) - It is suggested to input the IP address of the LAN port of the

Router. The default value is 192.168.0.254.
Default Domain (Optional) - Input the domain name of your network.

Primary DNS - (Optional) Input the DNS IP address provided by your ISP or consult your

ISP. Or consult your ISP.
Secondary DNS (Optional) - Input the IP address of another DNS server if your ISP

provides two DNS servers.

Note:
To use the DHCP server function of the Router, you must configure all computers on the LAN as
"Obtain an IP Address automatically".

4.8.2 DHCP Client List

Choose menu "DHCP → DHCP Client List", and then you can view the information about the
clients attached to the Router.
Client Name - The name of the DHCP client

MAC Address - The MAC address of the DHCP client

Assigned IP - The IP address that the Router has allocated to the DHCP client

Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired,

a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click the Refresh button.

4.8.3 Address Reservation

Choose menu "DHCP → Address Reservation", and then you can view and add a reserved
address for clients via the next screen.When you specify a reserved IP address for a PC on the
- 56 -