Dhcp Client List; Address Reservation - TP-Link TL-WR843N User Manual

Address Lease Time - The Address Lease Time is the amount of time a network user will

be allowed connection to the Router with their current dynamic IP Address. Enter the amount
of time in minutes and the user will be "leased" this dynamic IP Address. After the time is up,
the user will be automatically assigned a new dynamic IP address. The range of the time is 1
~ 2880 minutes. The default value is 120 minutes.
Default Gateway - (Optional.) It is suggested to input the IP address of the LAN port of the

Router. The default value is 192.168.0.1.
Default Domain - (Optional.) Input the domain name of your network.

Primary DNS - (Optional.) Input the DNS IP address provided by your ISP or consult your

ISP.
Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides

two DNS servers.

Note:
To use the DHCP server function of the Router, you must configure all computers on the LAN as
"Obtain an IP Address automatically".

4.9.2 DHCP Client List

Choose menu "DHCP → DHCP Client List", you can view the information about the clients
attached to the Router in the screen as shown in Figure 4-31.
Client Name - The name of the DHCP client

MAC Address - The MAC address of the DHCP client

Assigned IP - The IP address that the Router has allocated to the DHCP client

Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired,

a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click the Refresh button.

4.9.3 Address Reservation

Choose menu "DHCP → Address Reservation", you can view and add a reserved address for
clients via the next screen (shown in Figure 4-32).When you specify a reserved IP address for a
TL-WR843N 300Mbps Wireless AP/Client Router User Guide
Figure 4-32 DHCP Clients List
- 56 -