Wireless; Wireless Settings - TP-Link TL-WR710N User Manual

7.6 Wireless

There are two submenus under the Wireless menu: Wireless Settings and Wireless Security.
Click any of them, and you will be able to configure the corresponding function.

7.6.1 Wireless Settings

Choose menu "Wireless → Wireless Settings", and then you can configure the basic settings
for the wireless network on this page.
Wireless Name of Root AP - Enter the SSID of AP that you want to access.

MAC Address of Root AP - Enter the MAC address of AP that you want to access.

Region - Select your region from the pull-down list. This field specifies the region where the

wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
WDS Mode -This field determines which WDS Mode will be used. It is not necessary to

change the WDS Mode unless you notice network communication problems with root AP. If
you select Auto, then Router will choose the appropriate WDS Mode automatically.
Enable Wireless Radio - The wireless radio of the AP can be enabled or disabled to allow or

deny wireless stations to access. If enabled, the wireless stations will be able to access the AP,
otherwise, wireless stations will not be able to access the AP.
Survey - Click this button, you can search the APs.


Note:
- 164 -