Dhcp Client List; Address Reservation - TP-Link TL-WR902AC User Manual


Note:
To use the DHCP server function of the Router, you must configure all computers on the LAN as
"Obtain an IP Address automatically".

4.5.2 DHCP Client List

Choose menu "DHCP → DHCP Client List", and then you can view the information about the
clients attached to the Router in the screen as shown below.
Client Name - The name of the DHCP client

MAC Address - The MAC address of the DHCP client

Assigned IP - The IP address that the Router has allocated to the DHCP client

Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired,

a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click the Refresh button.

4.5.3 Address Reservation

Choose menu "DHCP → Address Reservation", and then you can view and add a reserved
address for clients via the next screen. When you specify a reserved IP address for a PC on the
LAN, that PC will always receive the same IP address each time when it accesses the DHCP
server. Reserved IP addresses should be assigned to the servers that require permanent IP
settings.
MAC Address - The MAC address of the PC for which you want to reserve an IP address.

TL-WR902AC AC750 Wireless Travel Router
- 57 -