Remote Management; Parental Control - TP-Link TL-WR710N User Manual

Click the Save button to save your settings.

Note:
If your PC is blocked but you want to access the Router again, press and hold the WPS button
for more than 5 seconds to reset the Router to factory defaults.

4.11.4 Remote Management

You can configure the Remote Management function on this page. This feature allows you to
manage your Router from a remote location, via the Internet.
Web Management Port - Web browser access normally uses the standard HTTP service

port 80. This router's default remote management Web port number is
security, you can change the remote management Web interface to a custom port by
entering that number in this box provided. Choose a number between 1024 and 65535, but
do not use the number of any common service port.
Remote Management IP Address - This is the current address you will use when

accessing your router from the Internet. The default IP Address is 0.0.0.0. It means this
function is disabled. To enable this function, change the default IP Address to another IP
Address as desired.
To access the router, you will type your router's WAN IP Address into your browser's Address (in
IE) or Location (in Navigator) box, followed by a colon and the custom port number. For example,
if your Router's WAN address is 202.96.12.8 and you use port number 8080, enter in your
browser: http://202.96.12.8:8080. You will be asked for the router's password. After successfully
entering the password, you will be able to access the router's Web-based utility.

Note:
Be sure to change the router's default password to a very secure password.

4.12 Parental Control

Choose menu "Parental Control", and you can configure the parental control. The Parental
Control function can be used to control the internet activities of the child, limit the child to access
certain websites and restrict the time of surfing.
- 72 -
80.
For greater