Wireless Advanced - TP-Link TL-WR710N User Manual


Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field.

Enter wireless station A/B in the Description field.

Select Enabled in the Status pull-down list.

Click the Save button.

Click the Back button.
The filtering rules that configured should be similar to the following list:

6.6.4 Wireless Advanced

Choose menu "Wireless → Wireless Advanced", and then you can configure the advanced
settings of your wireless network.

Transmit Power - Here you can specify the transmit power of Router. You can select High,
Middle or Low which you would like. High is the default setting and is recommended.

Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here.
The beacons are the packets sent by the Router to synchronize a wireless network. Beacon
Interval value determines the time interval of the beacons. The default value is 100.

RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet
is larger than the specified RTS Threshold size, the Router will send RTS frames to a
particular receiving station and negotiate the sending of a data frame. The default value is
2346.

Fragmentation Threshold - This value is the maximum size determining whether packets
will be fragmented. Setting the Fragmentation Threshold too low may result in poor network
- 143 -