Wireless; Wireless Settings - TP-Link TL-WR710N User Manual

Type - Choosing Smart IP (DHCP) to get IP address from DHCP server, or choosing static IP

to config IP address manually.
IP Address - Enter the IP address of your system in dotted-decimal notation (factory default -

192.168.0.254).
Subnet Mask - An address code that determines the size of the network. Normally

255.255.255.0 is used as the subnet mask.
IGMP Proxy - The Internet Group Management Protocol(IGMP) feature allows your devices in

LAN can watch TV.

Note:
1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router.
2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically， while the Virtual Server and
DMZ Host will not take effect until they are re-configured.
3. When you choose the Smart IP(DHCP) mode, the DHCP Server function will be disabled.

5.7 Wireless

There are five submenus under the Wireless menu: Wireless Settings, Wireless Security,
Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click any of them, and
you will be able to configure the corresponding function.

5.7.1 Wireless Settings

Choose menu "Wireless → Wireless Settings", and then you can configure the basic settings
for the wireless network on this page.
- 109 -