3.
Click the Next button. You will then see the Finish page. Click the Reboot button to make
your wireless configuration take effect and finish the Quick Setup.
3.2.5 WISP Client Router Mode
When you choose WISP Client Router on Working Mode page, take the following steps:
1.
Click Next, and then WAN Connection Type page will appear.
The Router supports three popular ways Dynamic IP, Static IP and PPPoE to connect to the
Internet. To make sure the connection type your ISP provides, please refer to the ISP. Make sure
the cable is securely plugged into the WAN port before detection.
- 24 -