TP-Link TL-WR710N User Manual page 201

Click the Save button to save your settings.
3. If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. Then you
should enter the following parameters:
User Name/Password - Enter the User Name and Password provided by your ISP.

These fields are case-sensitive.
Confirm Password - Enter again the Password provided by your ISP to ensure the

password you entered is correct.
Secondary Connection - It's available only for PPPoE Connection. If your ISP provides

an extra Connection type such as Dynamic/Static IP to connect to a local area network,
then you can check the radio button of Dynamic/Static IP to activate this secondary
connection.

Disabled - The Secondary Connection is disabled by default, so there is PPPoE
connection only. This is recommended.

Dynamic IP - You can check this radio button to use Dynamic IP as the secondary
connection to connect to the local area network provided by ISP.

Static IP - You can check this radio button to use Static IP as the secondary
connection to connect to the local area network provided by ISP.
Connect on Demand - In this mode, the Internet connection can be terminated

automatically after a specified inactivity period (Max Idle Time) and be re-established
- 189 -