After you specify the condition, click Save/Apply to save the entry.
4.4.9
Bandwidth Control
Choose "Advanced Setup""Bandwidth Control" and then you will see the screen as shown in
Figure 4-45. This page allows you to enable this function and to configure the value of Total
Upstream/Downstream Bandwidth.
Enable Bandwidth Control: Check this box to enable the Bandwidth Control function.
Total Upstream Bandwidth (Kbps): Enter the upload speed through the WAN port.
Total Downstream Bandwidth (Kbps): Enter the download speed through the WAN port.
Save/Apply: Click this button to make the configuration take effect.
TD-W8960N
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-44
Figure 4-45
44