Quick Reference Guide - Sharp FO-1660 Service Manual

5. Connecting the Multifunction interface box
The Multifunction Interface kit which comes with your fax machine
allows you to use your fax as a printer and scanner, and lets you
perform fax operations from your computer via the fax modem in your
fax machine. Follow the steps below to connect the Multifunction
Interface box and cables.
Important:
Use only the provided interface cable and modular plug cable.
1. Make sure that your fax is unplugged and the power switch is
turned off on your computer.
2. Insert the female end of the interface cable into the serial
(RS232C) port on your computer. Tighten the screws with a
screwdriver.
3. Insert the male end of the interface cable into the port on the
Multifunction Interface box. Tighten the screws with a screwdriver.
4. Insert one end of the modular plug cable into the socket on the
Multifunction Interface box, and the other end into the socket on
your fax as shown (the ends of the cable are identical).

[5] Quick reference guide

FUNCTION key menu
The following chart shows the layout of the functions and settings accessed by pressing the FUNCTION key. First press the FUNCTION key, the
appropriate numeric key as shown, and then "#" or "
Instructions for making each setting appear in the display. If you have any difficulty, refer to the detailed instructions on the page shown below the
setting.
1
Listing Mode
Timer Mode
Send Mode Activity Report
Timer List
Poll Mode
Telephone Number
List
Passcode List
Option Setting List
Anti Junk Fax
Number List
Program and Group
List
Print Setup List
" until the desired item appears.
3
2
Entry Mode
Fax/Tel Numbers
for Auto Dialing
Own Number and
Name Set
Polling Security
Select
Passcode Numbers
for Polling
Date and Time Set
Daylight Saving
Store Junk Number
FUNCTION
4
Optional Settings
Fine Resolution Quiet Detect Time
Priority
Fax Reception
Number of Rings in When TAD Fails
Auto Mode
Distinctive Ringing
Recall Wait Interval
Fax Signal Receive
Recall Times
Junk Number Check
Tel/Fax Remoter
Polling
Number
Auto Cover Sheet
Remote Reception
Select
Activity Report
Auto Print
Transaction Report
Print Select
ECM
Dial Mode
TAD Connected
1 – 9
5
6
Print Set-up
Cover Sheet
Initialize Film
Cover Sheet
Header
Reception Ratio
2 in 1 Print
Paper Type Set
Paper Size Set
Copy Cut-off
UX-600MU/MC
FO-1660U/C
7
Program/Group
Program Entry
Mode
Group Entry
Mode