Table of Contents
Advertisement
UX-600MU/MC
FO-1660U/C
4
Replace the imaging film, making sure that the flange goes into
the rear slot on the left side of the printing compartment. Also,
make sure that the right, rear gear engages with the gear below it.
5
Wind the film slightly (rotate the gear on the right side of the
empty spool) so that there is no slack in the film. Make sure that
both edges of the film wind onto the spool evenly.
Space
Press this key twice
to enter a space.
Letters and numbers
To enter a letter or number, press the appropriate
key repeatedly until the desired number/letter
appears in the display (the number appears first,
then the letters in the order marked above the key).
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
9
7
8
0
Symbols
Press either key repeatedly until the
desired symbol appears (see the
symbol list on the following page).
6
Close the print compartment cover, making sure it clicks into
place.
•
Caution! Close the cover slowly to make sure it doesn't pinch
your fingers.
Delete
Press this key to delete the letter
highlighted by the cursor (if the
SPEED
DIAL
cursor is to the right of the last
letter entered, it will backspace
and delete the last letter).
REDIAL
Shift
Press this key once to change
case (press it again to change
back).
HOLD/
SEARCH
Cursor left
Press this key to move the cursor
to the left.
SPEAKER
Cursor right
Press this key to move the cursor
to the right.
1 – 8
Advertisement
Table of Contents
