Quick Reference Guide; Option Imaging Film Specifications - Sharp UX-P410 Service Manual

UX-P410TH/FO-P610TH/NX-P160TH

[5] Quick reference guide

SENDING FAXES
Place your document (up to 10 pages) face down in the document feeder.
Normal Dialing
1. Lift the handset or press
2. Dial the fax number.
3. Wait for the reception tone (if a person answers, ask them to press
their Start key).
START/MEMORY
4. Press .
Automatic Dialing
1. Press or until the name of the other party appears in the dis-
play (if no name was stored, the number will appear).
START/MEMORY
2. Press .
Direct Keypad Dialing
1. Dial the fax number.
START/MEMORY
2. Press .
RECEIVING FAXES
RECEPTION
MODE
FAX mode: The fax machine automatically answers and receives faxes.
TEL mode: Answer all calls (even faxes) by picking up the handset. To
START/MEMORY
begin fax reception, press
TEL/FAX mode: The fax machine automatically answers and receives
faxes. Voice calls are signalled by a special ringing sound.
A.M. mode: Select this mode when an answering machine is connected
to the fax and the answering machine is turned on.
STORING AUTO DIAL NUMBERS
FUNCTION
1. Press once and twice.
2. Enter the full fax/phone number.
START/MEMORY
3. Press .
4. Enter a name by pressing number keys. (To enter two letters in suc-
cession that require the same key, press
letter.)
G =
SPACE =
A = H =
B =
I =
C =
J =
D = K =
L =
E =
F =
M =
STOP
START/MEMORY
5. Press and then
.
TEL FAX
01-JAN 10:30
TEL/FAX A.M.
TEL FAX
01-JAN 10:30
TEL/FAX A.M.
TEL FAX
01-JAN 10:30
TEL/FAX A.M.
TEL FAX
01-JAN 10:30
TEL/FAX A.M.
.
after entering the first
N = U =
V =
O =
W =
P =
Q = X =
R =
Y =
S =
Z =
T =
.

[6] Option imaging film specifications

1. Structure
This article is composed of polyester film coated with heat-resistant layer,
matt layer and hot melt ink layer, leader film and paper core. Ink film
specification is "DNP standard ink film HC".
Heat Resistant Layer
1
Base Film
2
Matt Layer
3
Hot melt Ink Layer
4
2. Details of compositions
2-1. Base film
Heading
Material
2-2. Heat resistant layer
Heading
Grade
2-3. Matt layer
Heading
Grade
2-4. Hot melt ink layer
Heading
Grade
1 – 8
Requirements Measuring method
Polyethylene-
–
terephthalate
Requirements Measuring method
HR Mixer P-5 –
Requirements Measuring method
ML Sumi –
Requirements Measuring method
#507W –
1
2
3
4